top of page
Epoxy XLR8 curing accelerant for fast-drying epoxy floors

Epoxy XLR8: Fast-Cure Additive for Eco Epoxy Shield

Epoxy XLR8: Fast-Cure Additive for Eco Epoxy Shield

Want to reduce the time between coats on an Eco Epoxy Shield project? Epoxy XLR8 is a curing accelerator that you mix into Eco Epoxy Shield to speed up its cure. It is intended for use with Eco Epoxy Shield and is not a standalone floor coating.

 

Speed up your Eco Epoxy Shield project

  • Faster curing: The product page describes one 200 mL pack as providing 30% faster curing, or two packs as providing 60% faster curing at 25°C.

  • Shorter time between coats: Faster curing can help you move through a two-coat project sooner.

  • Simple dosing: Add the accelerator to a prepared Eco Epoxy Shield mix at the recommended rate.

  • Made for Eco Epoxy Shield: The product page warns that use with other manufacturers’ products may affect performance.

 

Where to use it

Use Epoxy XLR8 only as an additive in Eco Epoxy Shield, following the instructions for both products. It is suited to projects where a shorter cure schedule is needed. Because it reduces the mixture’s working time, prepare the floor, tools and materials before mixing.

 

Product details

FeatureDetails
Product typeEpoxy curing accelerator
Intended productEco Epoxy Shield
Dosage for 15 L Eco Epoxy Shield kit1 × 200 mL pack for 30% faster curing; 2 × 200 mL packs for 60% faster curing
Acceleration figuresBased on 25°C, according to the product page
MixingAdd to Eco Epoxy Shield after preparing it according to its product instructions; mix thoroughly again
Working timeReduced after the additive is mixed in; no exact pot life stated
Maximum dosageDo not exceed 2 × 200 mL packs per 15 L kit
Use with other brandsNot recommended by the manufacturer
Pack size200 mL packs

 

How to use

  1. Prepare the surface, tools and work area before mixing.

  2. Mix Eco Epoxy Shield according to its product instructions.

  3. Add the recommended Epoxy XLR8 dose: one 200 mL pack for 30% faster curing, or two packs for 60% faster curing at 25°C.

  4. Mix thoroughly again and apply immediately. The accelerator shortens the mixture’s working time.

  5. Do not exceed the recommended dose. The product page warns that overdosing may make the finished coating brittle or cause yellowing under stress.

 

Read the current product data sheet and Safety Data Sheets for both products before use.

 

Use Epoxy XLR8 with Eco Epoxy Shield when you need a faster cure schedule.

$29.65Price
Quantity

HOW MUCH WILL YOU NEED? 

RESULTS

Total Area:

Litres Needed:

Related Products

bottom of page