top of page
Water-based acrylic primer for porous concrete and stone

Eco Bond: Primer for Concrete Floors

Preparing a concrete floor for a coating? Eco Bond is a ready-to-use, water-based acrylic primer and sealer designed to penetrate porous concrete and provide a bonding layer for a compatible topcoat. It can also help even out absorption on rough or weathered concrete.

 

Prepare porous concrete for coating

  • Helps improve adhesion: Provides a primer layer between suitable concrete and a compatible topcoat.

  • Penetrates porous surfaces: Designed for absorbent, chalky or uneven concrete.

  • Helps even out absorption: Seals thirsty concrete so the topcoat can apply more uniformly.

  • Ready to use: Apply directly from the container; no dilution is specified.

  • Low odour and ultra-low VOC: The product page describes Eco Bond as water-based, non-flammable and low odour.

 

Where to use it

Use Eco Bond on suitable porous concrete before applying a compatible sealer or coating. The product page lists indoor and outdoor surfaces such as garage floors, driveways, paths and patios. Check that Eco Bond is compatible with your chosen topcoat before use.

 

Product details

FeatureDetails
Product typeWater-based acrylic primer and sealer
Suitable surfacesPorous concrete and other compatible cement-based substrates
UseInterior and exterior
ApplicationReady to use; apply with a soft-bristled broom
Approximate coverage5–10 m²/L per coat, depending on porosity, texture and application
Topcoat timingApply the chosen topcoat within 24 hours
Moisture protectionKeep the primed surface dry for at least 24 hours
Application temperature5–30°C
Rain exposureAvoid application if rain is expected within 24 hours
VOC and odourUltra-low VOC; low odour
FlammabilityNon-flammable

 

How to apply

  1. Make sure the surface is clean, dry and free from grease, oil, dust and curing agents.

  2. Check the concrete moisture level as directed in the product instructions.

  3. Apply Eco Bond directly from the container with a soft-bristled broom, spreading it evenly so the surface absorbs the primer.

  4. Allow it to dry, then apply a compatible topcoat within 24 hours.

  5. Keep the treated surface dry for at least 24 hours after application.

 

Coverage depends on the surface and its porosity. Read the current product data sheet and Safety Data Sheet before use.

 

Prepare porous concrete for a compatible coating system with Eco Bond.

From $125.40Sale Price
Quantity

HOW MUCH WILL YOU NEED? 

RESULTS

Total Area:

Litres Needed:

Related Products

bottom of page