top of page
Heavy duty floor stripper for removing old polish from vinyl and concrete

Eco Strip: Floor Polish Remover

Eco Strip Floor Polish Remover

Need to remove built-up floor polish before refreshing your floors? Eco Strip is a fast-acting, water-based floor stripper that helps break down stubborn, crosslinked polish so it can be scrubbed away. It’s suitable for concrete, vinyl, linoleum, rubber, and timber floors, with different dilution rates for each surface.

 

Where can I use Eco Strip?

Eco Strip can be used on:

  • Concrete

  • Vinyl

  • Linoleum

  • Rubber

  • Timber floors

 

Do not use Eco Strip on raw timber. Always test a small, inconspicuous area first and check that the floor is suitable for stripping.

 

How to dilute Eco Strip

Floor surfaceDilution
Concrete, vinyl, and rubber300 mL Eco Strip per 1 L water
Linoleum125 mL Eco Strip per 1 L hot water
Timber (not raw timber)200 mL Eco Strip per 1 L water

 

How to strip floor polish

  1. Dilute Eco Strip at the rate recommended for your floor.
  2. Apply the solution generously to the area you’re stripping.

  3. Allow it to work for approximately 5 minutes.

  4. Scrub with a stiff brush or a floor machine fitted with a nylon stripping pad.

  5. Mop up the residue, then rinse thoroughly with clean water.

  6. Let the floor dry completely before sealing or re-polishing.

 

For best results, work in manageable sections and don’t let the solution dry on the floor.

 

Product details

  • Formula: Water-based, ammoniated concentrate

  • Odour: Ammoniacal

  • Flammability: Non-flammable

  • Shelf life: 3 years when stored at 5–35°C

  • Available sizes: 1 L, 5 L, 15 L, and 200 L

 

Read the Safety Data Sheet before use and follow its handling guidance.

 

Ready to remove old floor polish?
Choose your Eco Strip size and follow the dilution instructions for your floor.

$29.30Price
Quantity

HOW MUCH WILL YOU NEED? 

RESULTS

Total Area:

Litres Needed:

Related Products

bottom of page