Eco Sparta Shield (FAST) | Fast-Cure 100% Polyaspartic Concrete Coating
Eco Sparta Shield (Fast): Polyaspartic Concrete Coating
Protect prepared concrete with Eco Sparta Shield (Fast), a two-part polyaspartic coating with a clear, high-gloss finish. It is designed for interior and exterior concrete, including garage floors, driveways and patios. Its fast-setting formula allows premises to return to service within 24 hours, according to the product page.
Durable protection with a faster turnaround
High-gloss finish: Creates a clear, glossy surface.
For indoor and outdoor concrete: Suitable for residential, commercial and industrial floors.
Resists common spills: Designed to resist petrol, diesel and many acids.
UV stable: Helps the clear finish resist yellowing in sunlight.
Fast turnaround: The product page states premises can return to service within 24 hours.
Where to use it
Use Eco Sparta Shield (Fast) on properly prepared interior or exterior concrete, such as garage floors, driveways, patios and workshop floors. It can also be used as a clear protective topcoat over decorative flake systems.
This is a two-part coating that needs careful mixing and a mechanically prepared surface. The application instructions specify clean, dry, open-textured concrete, prepared by diamond grinding or shot blasting. Many homeowners may prefer professional surface preparation and application.
Product details
| Feature | Details |
|---|---|
| Product type | Two-component, 100% polyaspartic concrete coating |
| Suitable surfaces | Prepared interior and exterior concrete |
| Finish | High gloss; minimum 85 gloss units at 60° |
| Mix ratio | 2 parts Part A to 1 part Part B, by volume |
| Working time after mixing | Approximately 15 minutes |
| Approximate coverage | 8 m²/L per coat |
| Surface dry time | Approximately 30 minutes at 25°C |
| Return to service | Premises can resume operations within 24 hours |
| Application temperature | 10–30°C, according to the technical data |
| Rain exposure | Avoid application if rain is expected within 30 minutes |
| VOC and odour | Low VOC; slight odour |
| Flammability | Non-flammable |
| Storage | 2-year shelf life; store at 5–35°C |
| Pack sizes | 6 L and 30 L kits |
How to apply
Prepare the concrete so it is clean, dry and free from grease, oil, wax, laitance and curing compounds. The application instructions specify diamond grinding or shot blasting to create an open-textured surface.
Measure Part A and Part B accurately at a 2:1 ratio by volume. Follow the product data sheet for mixing, including colourant instructions if applicable.
Apply promptly using a brush, roller, squeegee or rake. Work quickly, maintain a wet edge and avoid excessive re-rolling.
Protect the coating from rain during the initial application period and follow the product data sheet for return-to-service guidance.
Check the current product data sheet and Safety Data Sheets before mixing or application.
Protect prepared concrete with the clear, high-gloss finish of Eco Sparta Shield (Fast).

















