Eco Densi Shield Sodium: Concrete Hardener and Densifier
Eco Densi Shield Sodium: Concrete Hardener and Densifier
Help reduce concrete dusting and strengthen the surface with Eco Densi Shield Sodium. This liquid sodium silicate treatment penetrates concrete and reacts within the surface. It can be used on existing concrete and, when diluted as directed, on green concrete as a curing compound.
Help strengthen and protect concrete
Hardens the surface: Reacts with concrete to create a denser surface.
Helps reduce dusting: Useful for concrete floors that produce fine dust.
Supports polishing: Can be used as part of a concrete grinding and polishing process.
Ready to use on existing concrete: Apply directly from the container for standard treatment.
Non-toxic and non-flammable: The product page describes it as non-toxic, odour-free and compliant with current VOC regulations.
Where to use it
Use Eco Densi Shield Sodium on suitable concrete floors, including garages, workshops, walkways and floors being prepared for polishing. It can also be used on green concrete as a curing compound, but that application requires dilution.
Product details
| Feature | Details |
|---|---|
| Product type | Sodium silicate concrete hardener and densifier |
| Suitable surfaces | Concrete, including trowelled, green and honed concrete |
| Standard application | Ready to use on existing concrete |
| Green concrete curing application | Dilute 1 part product with 2 parts water |
| Application equipment | Low-pressure sprayer, pump pack, soft-bristled broom or microfibre applicator |
| Approximate coverage | 5–20 m²/L, depending on concrete porosity and absorption |
| Wet time | Keep the surface wet for at least 15 minutes |
| Temperature | Do not apply above 30°C or near freezing |
| Rain exposure | Avoid application if rain is expected within 30 minutes |
| Odour and VOC | Odour-free; VOC compliant, according to product information |
| Flammability | Non-flammable |
How to apply
Make sure existing concrete is clean and free from grease, oil, dust, paint and curing agents. Remove contaminants that may prevent penetration.
For existing concrete, apply Eco Densi Shield Sodium ready to use in a thin, even coat with a low-pressure sprayer, pump pack, soft-bristled broom or microfibre applicator.
Keep the surface wet with product for at least 15 minutes, while avoiding excessive pooling.
For green concrete used as a curing compound, dilute 1 part product with 2 parts water and follow the current product data sheet.
For honed concrete, the product page specifies application after grouting with Eco Grout and before resin-bond diamond polishing.
Coverage varies with the concrete’s porosity and absorption. Check the current product data sheet and Safety Data Sheet before use.
Help reduce dusting and harden suitable concrete with Eco Densi Shield Sodium.

















