top of page
eco pave seal by Ecoshield 5 litre

Eco Pave Seal | Invisible Water-Based Silane Sealer for Stone & Masonry

Eco Pave Seal: Invisible Water-Based Sealer for Pavers & Stone

Help protect your outdoor pavers and stone while keeping their natural appearance. Eco Pave Seal is a ready-to-use, water-based penetrating sealer for suitable porous masonry surfaces. It helps repel water and resist stains from oil, food, wine and tannins without leaving a surface coating.

 

Protect your pavers without changing their look

Eco Pave Seal penetrates the surface to create a breathable barrier. It’s designed to preserve the natural appearance and slip resistance of the treated surface.

 

  • Helps repel water: Reduces water absorption into suitable masonry and stone.

  • Helps resist everyday stains: Offers protection against oil, food, wine and tannin stains.

  • Breathable protection: Helps reduce moisture-related issues such as efflorescence, erosion and spalling.

  • Natural-looking finish: Designed to protect without adding gloss or changing the surface’s natural appearance.

  • Water-based and non-toxic: The product data sheet describes the formula as water-based and states that it emits zero toxic VOCs.

 

Where to use it

Eco Pave Seal is suitable for compatible concrete, masonry paving, ceramic and natural stone surfaces, indoors or outdoors. Results depend on the surface’s porosity and condition. Test a small, inconspicuous area first.

 

Product details

FeatureDetails
Product typeWater-based penetrating silane sealer
Suitable surfacesConcrete, masonry paving, ceramic and natural stone
UseInterior and exterior
FinishInvisible; designed to preserve the natural appearance and slip resistance
ApplicationReady to use; apply with a soft-bristled broom or microfibre floor sweeper
Recommended coatsTwo; apply the second coat once the first coat is dry
Approximate coveragePorous surfaces: 5 m²/L per coat; non-porous surfaces: approximately 20 m²/L
Application temperature10–30°C, according to the product data sheet
Weather protectionKeep the surface dry for at least 24 hours after application; avoid applying if rain is expected within 24 hours
MaintenanceClean treated surfaces with Eco Clean+Seal

 

Coverage varies with the surface and its porosity. The product data sheet does not specify an exact recoat interval or full-cure time; follow its “once dry” guidance and check the current label before use.

 

How to apply

  1. Make sure the surface is clean, dry and free of oil, grease, dust and other contaminants.

  2. Apply Eco Pave Seal directly from the container and spread it evenly with a soft-bristled broom or microfibre floor sweeper.

  3. Allow the first coat to dry, then apply a second coat.

  4. Prevent puddles or pooling, which may cause discolouration.

  5. Keep the treated area dry for at least 24 hours.

 

Check the product label and Safety Data Sheet before application.

 

Protect your pavers while keeping their natural look. Choose Eco Pave Seal for your next paving or stone sealing project.

From $124.00Sale Price
Quantity

HOW MUCH WILL YOU NEED? 

RESULTS

Total Area:

Litres Needed:

Related Products

bottom of page