top of page
Eco Sports Shield Colour non-slip slip resistant concrete coating

Eco Sports Shield is an environmentally friendly UV stable non-yellowing performance sports floor coating available in the Australian Standard colours (viewable here on our website).


Eco Sports Shield is a coating which can achieve a P5 slip resistance rating to AS 4586:2013. Upon completion of your project with Eco Sports Shield, you will require a wet slip resistance test to confirm you have achieved a P5 to AS 4663:2013. Results will vary when used on a ramped surface due to the slope correction value adjustment to the Australian Standards.


Eco Sports Shield has been developed from innovative Polycarbonate and acrylic hybrid technology. It incorporates the superior adhesion, flexibility and UV stability of acrylic with the hardwearing durable finish of Polycarbonate in a single coating system.


Eco Sports Shield emits almost zero toxic odours (VOC’s) and is water based, making it safe to use and minimising environmental impact.


Eco Sports Shield is suitable for hard surface exterior and interior applications including concrete, bitumen, ceramic and stone.


Eco Sports Shield is commonly used for sports courts, water parks, pedestrian walkways, and entertaining areas.



  • Extremely durable and abrasion resistant
  • UV stable with excellent weatherability maintaining its colour vibrancy for years
  • Superior resistance to dirt pick-up for easy maintenance and cleaning
  • Fast curing reducing delays between recoat times allowing jobs to be completed in one day
  • Efflorescence resistant to prevent blistering and delamination
  • Water resistant for protection against water damage
  • and staining

  • Optional 2-pack part B additive available to increase strength and abrasion. 1 litre of Chainlink additive goes into 10 litres of Eco Sports Shield
  • Virtually odourless and environmentally friendly
  • Ready to use from the container and easy to apply



One coat will cover approximately 5 – 10m² per litre.

Eco Sports Shield (Colour Kit)


Standard colour range is as follows:

  • B64 – Charcoal
  • N14 – White
  • N23 – Neutral Grey
  • N35 – Light Grey
  • N43 – Pipeline Grey
  • N45 – Koala Grey
  • N61 – Black
  • N64 – Dark Grey
  • Y56 – Merino

All other colours on the Australian Standards colour chart are classified as “Vivid”.

Note: our epoxy, polyaspartic and sports floor coatings chart colours will be displayed differently depending upon the computer and screen settings. Therefore they should be treated as a guide only.

The Australian Standard AS2700 “Colour Standards for General Purposes” presents reference colours for use in choosing colour schemes. These colours are for use in the industrial, architectural and decorative areas with particular emphasis on paints and related materials.

AS2700 has been in use in Australia since 1985, and is extensively referred to in many other Australian Standards .

Australian Standards colours are used throughout many Industries in Australia and New Zealand.

Australian Standards Colours are used  for the marking of physical hazards and the identification of certain equipment in many Industries.

bottom of page