Water-based timber flooring coating. Hardwood floor finishes come in a number of different varieties, so it’s important to know when to use a certain type and not another. Here’s why you should consider Water-based timber floor coating.
Here’s a rundown of the most common types of finish you’ll find, and the features of each.
A very popular finish choice, especially for commercial and sports floor settings. Oil-based polyurethane requires a long drying time between coats: most varieties take 8 to 10 hours to dry. Oil-based poly has a high VOC content and a strong odour when applied. Very durable. Tends to turn a yellow or amber colour with age.
Has a lower VOC content, a milder odour, and requires less drying time than oil-based poly. Most varieties require just two to four hours of drying time between coats. Doesn’t yellow as much as oil-based polys do. Water-based timber floor coating polyurethane usually requires the application of more coats than oil-based finish does. Available in single-component and two-component varieties. More expensive than oil-based poly finishes.
This type of finish cures by absorbing moisture vapour from the air. Extremely high VOC content and very strong fumes––proper ventilation and respirators are required during application. Extremely durable. It’s more water-resistant than most other finishes. Most formulas amber with age. Relatively expensive compared to other finishes.
Penetrating oil / sealer
As the name suggests, this type of finish penetrates the wood and fills the pores to create a durable seal. Penetrating oil consists of a blend of natural oils, usually including tung oil. Tends to turn an amber colour over time. Very durable. Mild odour, low VOC, mellow sheen. Simple to apply and touch up. Needs long drying times between coats––usually 24 to 48 hours––but will turn whitish in colour if it is allowed to dry too quickly. Penetrating oil is good for use on antique flooring.
Acid-cured / Swedish finishes
Among the most durable types of floor finishes. Extremely high VOC content. Takes about two hours to dry in between coats, and takes up to 60 days to fully cure.
This was a common hardwood floor finish of choice before polyurethane finishes were created. Wax seeps into the pores of the wood to give it extra durability, but it’s vulnerable to water damage. Wax needs regular maintenance and is not as durable as poly. Low luster, amber appearance. Tends to darken the wood. Low VOC content.
Usually used in conjunction with wax; shellac is applied to the floor as a base coat and wax is applied on top. Some shellac products are not compatible with modern types of finish, so a floor that contains shellac should be tested before anything new is applied to it. Test adhesion of the finish you want to apply. Shellac is non-toxic and has a very low VOC content. It is available in “dewaxed” form from a variety of manufacturers. Shellac is not easy to apply. Shellac doesn’t require buffing between coats and dries very quickly. However, it’s not as durable as polyurethane or polycarbonate finishes, and it’s vulnerable to damage from water, alcohol, and ammonia.
Varnish was commonly used to finish wood floors before polyurethane and polycarbonate was introduced to the market. Very durable. Gives the floor a clear to slightly amber look. Very strong odour, and has a high VOC content.
UV floor finishes
UV curing technology, used in conjunction with UV floor finishes, cure the floor instantly. This allows you to put the floors back into use almost immediately. Perfect for situations where you need a quick turnaround time, like restaurants and other commercial settings. A UV-cured hardwood floor is very resistant to mechanical and chemical abrasion.
Acrylic impregnated finish
Rarely used in residential settings, this finish is injected straight into the floor in order to create an extremely durable seal. Primarily used in commercial areas that have to endure heavy foot traffic.