Owners at Industrial Facilities often come to us wondering what type of coating system (epoxy vs polyurethante) is needed to protect their assets. Whether it is protecting steel or concrete surfaces exposed to chemicals or concrete that needs a coating or damaged concrete that needs to be repaired, we are often asked to come up with a solution to protect their facility. With so many different options available, it can be difficult to decide what is best for your facility. Here are some different types of epoxies and urethanes that can be used in your facility:
Epoxies have excellent adhesion to many substrates. They’re known for being “surface tolerant” which is why so many epoxy primers are specified. They can also be used as an intermediate coat and top coat due to their durability and impact resistance. They generally have very good chemical resistance which allows the higher performing epoxies to be used for:
- Tank linings
- Containment areas
- General protection against chemicals.
One of the downsides of epoxies is that will eventually chalk and fade. This is where Polyurethanes comes in to play, which we will discuss later. Here’s some of the different types of Epoxy Coatings:
100% Solids Epoxy
These epoxies generally have very little or no Volatile Organic Compounds (VOCs) and little to no odor. They can be used as a primer, intermediate and top coat depending on application. They can be mixed with different aggregates for trowel downs to resurface concrete. Another benefit is the use as binder to be mixed with metallic flakes, colour quartz, and as a base coat for colour flakes.
High Solids Epoxies
Most high solids epoxies provide excellent protection against acids and alkalis. These epoxies can generally be used on steel, concrete, and galvanized steel. Most H.S. epoxies have “fast cure” and “low temperature cure” hardeners that allow for a high level of productivity in the warmer months. They also have the ability to cure down to cooler temperatures in the colder months.
Polyamide Epoxies are one of the older epoxy technologies that are still used today. Usually these epoxies are economical and are used a primer and finish coat. They’re not as high performing as the high solids and 100% solids epoxies but they offer a great solution in areas where there’s no aggressive chemicals.
Cycloaliphatic & Novolac Epoxies
Both of these epoxies are very high performing epoxies that are ideal for harsh chemicals. They’re great choices for internal tank linings, secondary containment, pump pads, trenches, and other high exposure areas. Most novolacs are designed to handle 98% sulfuric acid and 37% HCL for splash & spillage.
Water Based Epoxies
Water Based Epoxies are great choices in less demanding areas. They usually do not hold up as well against chemicals and some of the solvent based & 100% solids epoxies. One great benefit is that these epoxies are usually low VOC and have little to no odor. Some common applications include control rooms, locker rooms, break rooms and concrete flooring for light traffic.
Phenalkamine cured epoxies are excellent for low temperature / cold weather applications. These coatings are fast setting, and can be recoated the same day which is beneficial for owners and contractors. Phenalkamines are usually lower viscosity than some of the other epoxies, which makes it a great choice for line stripping in facilities. They have a long pot life, great adhesion, and good chemical resistance.
Polyester epoxies are a very unique, two component non-yellowing epoxy coating. They provide a hard, high gloss tile-like finish that has outstanding wash and scrubbability. It is ideal as an anti-graffiti coating and has outstanding chemical and abrasion resistance.
Polyurethanes are known for their outstanding UV resistance, gloss retention and colour stability. These coatings are usually sold as finish and are usually applied at 2-3 mils DFT. One concern with polyurethanes is their sensitivity to humidity and moisture. As a rule of thumb, it is best to apply these coatings between 10 AM – 4 PM, which is when the humidity is generally at its lowest point of the day. Here’s some of the different types of Polyurethane Coatings:
Moisture Cured Urethanes
Moisture Cured Urethanes are one component urethanes that cure off of moisture and humidity. These coatings can normally handle higher dry service temperatures than epoxies and two component urethanes. They provide a hard finish that is very durable. Most MCU’s are aromatic, which basically means they can change colour over a period of time.
Acrylic Polyurethanes are known for their excellent gloss and colour retention, UV resistance, and provides a tough and durable finish. These coatings are used for exterior steel surfaces for long term protection. Acrylic Polyurethanes are usually made with an aliphatic compound which provides the long term stability needed in an Acrylic Polyurethane.
Polyester Polyurethanes is the premier Polyurethane in terms of abrasion, scratch, impact resistance and have excellent gloss and colour retention. These coatings are made with 100% Polyester resin which provides an extremely durable finish. Recommended as finish coat for concrete floors in high traffic areas and exterior structural steel surfaces. Polyester Polyurethanes are a true C.R.U. (Chemical Resistant Urethane), which makes it a great choice for:
- Aircraft hangars
- Service bay floors
- High traffic areas
Due to its resistance to a wide range of chemicals including:
- Most acids that you may come in contact with your floor.
Selecting epoxies and polyurethanes require careful selection. The right choice can add longer service to your assets and prevent you from having early failures. Ecoshield Performance Coatings can help owners and contractors determine the best coating solution for their specific need. Contact us today at email@example.com or 08 8185 7148 for assistance on your upcoming coating project.
Find out for yourself why we have dedicated ourselves to perfecting our Eco Epoxy Shield – 100% Solids.